No products in the basket.
Displays & Room Operating Units, FCU controllers, iSMA Controlli, Room Operating Units
iSMA – Touch Point – Wall Comfort Panel
Key Features
• Modern and smart design
• Intuitive management
• Ease of installation and configuration
• Multiprotocol interface
• Ultimate flexibility
• Free software: iSMA Tool & iSMA Configurator
• Five touch function buttons
• RS485 interface
• Modbus RTU/ASCII and BACnet MS/TP
• Temperature sensor as a standard, humidity and CO2 sensors as an option
• USB type C interface
• DIP switches for configuration
• Buzzer
• Navigation RGB LED
£100.00 – £245.00
The Touch Point is a modern comfort management wall panel with two most popular open communication protocols: Modbus RTU/ ASCII and BACnet MS/TP. The Touch Point is available in different configurations of sensors (temperature, CO2, and humidity), colors, and versions with or without display. The panel is equipped with an interactive TFT touchscreen, touch buttons, and glass panel.
The panel can be configured using the iSMA Configurator software or Modbus registers/BACnet objects.
Datasheet:
Touch Point Datasheet V1.0
| DESCRIPTION | TP | |
| Power supply | Voltage | 20-34 V DC |
| 24 V AC ± 20% | ||
| Built-in sensors | Temperature sensor | 10k NTC type, accuracy: ± 0.5˚C, resolution: ± 0.1˚C |
| Humidity sensor (applies to version with humidity sensor) | Range: 0-100% RH, accuracy: ± 2% RH in range 10-90% RH, resolution: ± 0.1% | |
| CO2 sensor (applies to version with CO2 sensor) | Range: 400-4000 ppm, accuracy: ± 30 ppm | |
| COM1 | RS485 interface | Up to 128 devices |
| Half- duplex | ||
| Communication protocols | Modbus RTU/ ASCII, BACnet MS/TP | |
| Ports | 2 RJ45 + screw connector | |
| Baud rate | 4800-115200 | |
| USB1 | USB 2.0 | USB type C |
The performances stated in this sheet can be modified without any prior notice.
| DESCRIPTION | TP | |
| Front panel | Surface | White/black glass |
| Display (applies to version with display) | TFT 0.96” | |
| Backlight | 3 intensity modes | |
| Buttons | 5 | |
| LED | 3 blue and 3 red for temperature | |
| 3 white for fan | ||
| 1 white for occupancy | ||
| 1 configurable RGB | ||
| Ingress protection | IP rating | IP20 for indoor installation |
| Temperature | Operating | From 0˚C to +40˚C |
| Storage | From -40˚C to +70˚C | |
| Humidity | Relative | From 5% to 95% RH (without condensation) |
| Screw connector | Type | Removable screw terminals |
| Maximum cable size | 1.5 mm2 (24…16 AWG) | |
| Housing | Material | Plastic, self-extinguishing ABS |
| Mounting | Standard 60 mm wall back box | |
| Dimensions | Width | 86 mm/3.39 in |
| Length | 86 mm/3.39 in | |
| Height | 14.5 mm/0.57 in | |
Based on 0 reviews
Be the first to review “iSMA – Touch Point – Wall Comfort Panel”
Related products
- IO Modules, iSMA Controlli
iSMA-B-MG-IP
• M-Bus TCP/IP and UDP/IP to M-Bus gateway
• Modbus TCP/IP to Modbus RTU/ASCII gateway
• Up to 180 meters (devices) of various types
• Two independent gateways operating
simultaneously in one device
• Built-in power supply for up to 60 M-Bus meters
(devices)
• Direct connection for up to 6 M-bus branches
• Built-in Mini USB port for configuration and
firmware updatesSKU: iSMA-B-MG-IP - FCU controllers, Thermokon
LCF02 Touch 2AO3DO room controller
720984 721011
Fancoil-Thermostat Temperatur – BUS
Power supply: 24 V = or 24 V ~ (±20%) SELV
Output: 2x 0..10 V (heating & cooling or 6-way-valve)
Output switching contact: 3x relay (3x fan speed)
Measuring range temperature: 1..50 °C
2x digital input for potential-free contact (window-contact, dew-point sensor or occupancy);
Input for ext Sensor for control loop, change-over or limiter
RS485 Modbus for configuration of controller (ca. 150 registers)
Optional 9600, 19200, 38400Bd, address range 1…240
Display: LCD backlight white, black symbols, capacitive touch screen
Enclosure: ABS, white, glass, 86x86x10,5 mm, IP20
Mounting: flush-mounting in standard EU box (Ø=60 mm, min. depth=45 mm
SKU: 720984 721011 - FCU controllers, Thermokon
JOY Fancoil 5DO room controller
751940 751957
Fancoil controller temperature – active
Output: switch contact: 5 x closer contact
(2x heating & cooling 240 V, load max. 500 mA (Triac),
3x fan stages 240 V, load max. 3 A),
Supply voltage: 85..260 V ~
Temperature range: 0..+50 °C
Accuracy temperature: ±1 K (typ. bei 21 °C)
Inputs:
DI1: Input forr NTC10k or potential-free contact
DI2: Input for digital, for floating contact (230 V ~)
DI3: Input digital, for potential-free contact
Display: LCD 2,5″ 240×160 px, blue background illumination
Enclosure: PC, pure white glass
Protective class: IP30 accord. to DIN EN 60529
Mounting: standard deep installation box (Ø=60 mm, depth min. 45 mm)
SKU: 751940 751957 - FCU controllers, Thermokon
LCF02 5DO Touch room controller
703307
DO RS485 Modbus 524 V
Fancoil controller temperature – active BUS 24 V
Power supply: 24 V = or 24 V ~ SELV ±10%
Output switching contact: 5x relais (2x heating & cooling, 3x fan speed) with combined supply
Measuring range: 1..50 °C
2x digital input for potential-free contact (window-contact, dew-point sensor or occupancy); Input for ext Sensor as Change-Over-Sensor, ext Sensor or thermal cutout
RS485 Modbus for configuration of controller (ca. 150 registers)
Optional 9600, 19200, 38400Bd, address range 1…240
Display: LCD 64x41mm², backlight white, defeatable
Enclosure: ABS, pure white, hardened acrylic glass with high scratch resistance, IP20
Mounting: flush-mounted in standard in-wall box (Ø=55 mm)
SKU: 703307
There are no reviews yet.