, ,

QuRouter 950M


Outdoor QuMax + RUT950 + SIM card access + PSU 24V PoE

£329.06 (£394.87 incl. VAT)

Add to Quote

Description:

QuRouter 950S is a professional industrial LTE Cat 4 & Wi-Fi router for IoT applications. Integrated with omnidirectional LTE and Wi-Fi antennas. This rugged device delivers high performance cellular communication in harsh environments and a wide operating temperature range. The router is equipped with 4G connectivity redundancy through

 

 

 

 

SKU: R950M Categories: , ,
MOBILE
Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
StatusSignal strength, SINR, RSRP, RSRQ, Bytes sent/received
BridgeDirect connection (bridge) between mobile ISP and device on LAN
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White listOperator black/white list
Multiple PDN (optional)Possibility to use different PDNs for multiple network access and services
Band managementBand lock, Used band status display
WIRELESS
Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFiWPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi securityWPA2-Enterprise – PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 100 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forward, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay
QoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancingBalance your internet traffic over multiple WAN connections
NetSnapper (optional)Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi securityWPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
VLANPort based and tag based VLAN separation
Mobile quota controlSet up custom data limits for both SIM cards
WEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTPSSTP client instance support
MODBUS TCP SLAVE
ID range1-255
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUAtheros Wasp, MIPS 74Kc, 550 MHz
RAM128 MB, DDR2
FLASH memory16 MB SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
INPUT/OUTPUT
Input1 x Digital non-isolated input (on 4 pin power connector)
Output1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
EventsSMS, EMAIL, RMS
POWER
Connector4 pin industrial DC power socket (inside QuRouter enclosure, no access from outside of the product, to get access please install additional QuPS4)
Input voltage range9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Power consumption< 2 W idle, < 7 W Max
PSU included24V 0.8A Passive PoE with EU or UK or US power cord (QuPSU P248)
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)
Ethernet4 x RJ45 ports, 10/100 Mbps (1x RJ45 with Passive PoE outside enclosure, 3x RJ45 inside enclosure – access from outside of QuRouter is possible after install additional QuRJ45)
I/O’s2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600) (access to INPUT/OUTPUT connector after open enclosure of QuRouter or install QuGland / QuPS4 which is not included in set)
Status LEDsNot visible from outside of enclosure, 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
PowerPassive PoE power support and 4 pin DC connector inside enclosure (to get access please install additional QuPS4)
Input/Output2 programmable Inputs/Outputs
ResetFactory reset button (no access from outside of enclosure, to get access please install additional QuRST)
LTE ANTENNA SPECIFICATION
Frequency0.694 – 0.96 GHz
1.7 – 2.2 GHz
2.2 – 2.7 GHz
Supported LTE bands1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 23, 25, 26, 27, 28, 29, 30, 33, 34, 35, 36, 37, 38, 39, 40, 41, 44, 53, 65, 66, 67, 68, 69, 70, 71, 85
Gain0.694 – 0.96 GHz : 4 dBi
1.7 – 2.2 GHz : 5 dBi
2.2 – 2.7 GHz : 6 dBi
VSWR<1.30, max <1.80
Beamwidth90°/90° ±30°
PolarizationVertical
Impedance50 Ω
WI-FI ANTENNA SPECIFICATION
Frequency2.40 – 2.50 GHz
Gain6 dBi
VSWR<1.70, max <2.00
Beamwidth360°/25° ±5°
PolarizationVertical
Impedance50 Ω
PHYSICAL SPECIFICATION
Casing materialAluminium housing, plastic panels
Dimensions50 mm x 100 mm x 110 mm (H x W x D)
Weight280 g
Mounting optionsPole or wall mount
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP67
MTBF270000 h
REGULATORY & TYPE APPROVALS
RegulatoryCE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance
OperatorAT&T, Verizon

 

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “QuRouter 950M”

There are no reviews yet.